Homelab & Self-Hosters
Keep an out-of-band eye on Proxmox, Home Assistant, GitLab, NAS, and local miners. Even if your primary hypervisor or Docker host locks up, your ESP32 stays online and sends the Discord alert.
When your server crashes, its monitoring containers go down with it. Run an always-on, sub-1W hardware watchdog for your homelab, self-hosted apps, or business infrastructure — with instant Discord alerts, real-time WebSocket UI, Swagger REST API, and 60-second browser flashing.
A faithful look at the on-device Web UI, live WebSocket logs, and Discord alerts.
Why rely on a monitoring container running on the very host that might fail?
Keep an out-of-band eye on Proxmox, Home Assistant, GitLab, NAS, and local miners. Even if your primary hypervisor or Docker host locks up, your ESP32 stays online and sends the Discord alert.
Turn a spare $4 ESP32, S3, C3, C5, or C6 board into a silent desk or server-rack status appliance. The WS2812B RGB LED stays dark when everything is healthy and pulses magenta only when a service drops.
Deploy low-cost, dedicated hardware probes across client sites or server rooms. Clone configurations in seconds via JSON backup/restore, integrate via the OpenAPI REST endpoints, and lock down settings with physical BOOT button authentication.
Zero manual file uploads — the embedded Web UI extracts automatically on first boot.
Configure credentials in the Improv Wi-Fi prompt, or join the open AP ESP32-Service-Uptime-Monitor and open 192.168.4.1.
Visit http://esp32-service-uptime-monitor.local/ (or the device's DHCP IP) to view live service cards and logs.
Short-press the physical BOOT button to unlock configuration for 10 minutes. Hold ≥ 10s for a full Factory Reset.
Engineered for reliability on constrained microcontrollers.
Runs non-blocking checks on Core 0 with 3-retry hysteresis before triggering an offline state, avoiding false alarms and unnecessary flash writes.
Sends rich embed notifications to your Discord channel only when a service transitions between ONLINE and OFFLINE.
Responsive Bootstrap 5 dashboard with dark mode, instant status filtering, system telemetry (heap, RSSI, temp), and live log streaming.
Full OpenAPI 3 specification served both on-device at /api/docs and statically right here on GitHub Pages.
Physical BOOT button authorization, 10-minute auto-lock, SSRF address validation, DNS rebinding protection, and OTA token rate-limiting.
Update firmware or web assets over HTTP/PlatformIO, and export or restore full JSON configuration snapshots anytime.
Click any row to select that board in the Web Flasher above. Pinouts are defined in include/devices.h.
| Environment | Board | Architecture | Storage | Status LED | RGB LED | BOOT Pin |
|---|---|---|---|---|---|---|
esp32-s3-cam |
ESP32-S3 CAM | Dual-core Xtensa LX7 | MicroSD (SD_MMC) |
GPIO 2 | GPIO 48 | GPIO 0 |
esp32-s3 |
ESP32-S3 DevKitC-1 | Dual-core Xtensa LX7 | LittleFS (16MB) | — | GPIO 48 | GPIO 0 |
esp32 |
ESP32-WROOM-32 | Dual-core Xtensa LX6 | LittleFS (4MB) | GPIO 2 | — | GPIO 0 |
esp32-c3 |
ESP32-C3 SuperMini | Single-core RISC-V | LittleFS (4MB) | GPIO 8 | — | GPIO 9 |
esp32-c6 |
ESP32-C6 DevKit | Single-core RISC-V (Wi-Fi 6) | LittleFS (4MB) | — | GPIO 8 | GPIO 9 |
esp32-c5 |
ESP32-C5 DevKit | Single-core RISC-V (Dual-Band Wi-Fi 6) | LittleFS (4MB) | — | GPIO 27 | GPIO 28 |
Visual hardware feedback on boards equipped with a WS2812B RGB LED (HAS_RGB_LED).
Free for personal homelabs, with a 30-day free evaluation trial and commercial licensing for organizations.
Individuals may use, compile, and modify the software free of charge for private, non-commercial homelab and hobby monitoring.
Companies and institutions can test and evaluate the software internally free of charge for 30 days. Continued production use, MSP deployments, or client hardware bundles require a Commercial License.
If you find this project useful in your homelab and would like to support its continued development: